Catc_read_pin_response_enable, Catc_read_revision_information, Catc_self_test – Teledyne LeCroy Merlins Wand - Users Manual User Manual
Page 130: Catc_set_default_pin_code
114
CATC M
ERLIN
’
S
W
AND
2.00
C
HAPTER
A
User’s Manual
Command Generator Command Descriptions
CATC_Read_PIN_Response_Enable
Read the global flag for allowing PINs to be sent to requesting devices during
authentication.
CATC_Read_Revision_Information
Merlin’s Wand uses this command to read the revision number of the Merlin’s
Wand baseband controller.
CATC_Self_Test
This command will perform self-test of Merlin’s Wand.
CATC_Set_Default_PIN_Code
Set the default PIN code, used for authentication purposes whenever a
device-specific PIN is unavailable.
Command Parameters
Examples
Comments
NA
Command Parameters
Examples
Comments
N/A
Return Events
CATC_Read_Revision_Information_Complete
CATC_Read_Revision_Information_Error
Command Parameters
Examples
Comments
N/A
Return Events
CATC_Self_Test_Complete
CATC_Self_Test_Error
Command Parameters
Examples
Comments
PIN_Code