Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 199)

183
CATC M ERLIN ’ S W AND 2.00 C HAPTER C
User’s Manual Merlin’s Wand Scripting Commands
Example
result = HCIReadClockOffset();
Trace("HCIReadClockOffset returned: ", result[0], "\n");
if (result[0] == "Success")
{
Trace("Clock offset is: 0x", result[1], "\n");
}
HCIReadConnectionAcceptTimeout()
HCIReadConnectionAcceptTimeout()
Return values
Returns a list with two values: status and timeout.
Status (element 0) is one of the following:
• “Success”
• “Failure”
Timeout (element 1) is the two-byte value of the timeout, interpreted as
multiples of 0.625-msec intervals.
Comments
Reads the current timeout interval for connection. The timeout value
defines the time duration from when the Host Controller sends a Connec-
tion Request event until the Host Controller automatically rejects an
incoming connection.
Example
result = HCIReadConnectionAcceptTimeout();
Trace("ReadConnectionAcceptTimeout returned: ", result[0],
"\n");
if (result[0] == "Success")
{
Trace("Timeout value is: 0x", result[1], "\n");
}
Parameter Meaning Default Value Comments
N/A