Catc_write_pin_response_enable, A.2 other hci events, A.3 l2cap command descriptions – Teledyne LeCroy Merlins Wand - Users Manual User Manual
Page 131: Configurationresponse, Other hci events l2cap command descriptions, 0 = disable 1 = enable
115
CATC M
ERLIN
’
S
W
AND
2.00
C
HAPTER
A
User’s Manual
Command Generator Command Descriptions
CATC_Write_PIN_Response_Enable
Write the global flag for allowing PINs to be sent to requesting devices during
authentication.
A.2 Other HCI Events
A.3 L2CAP Command Descriptions
ConfigurationResponse
Response to an incoming configuration request.
Command Parameters
Examples
Comments
PIN_Response_Enable
0 = disable
1 = enable
Return Events
Command Complete: Will return after the operation has completed.
Events
Command_Complete
PIN_Code_Request
Paring_Complete
Encryption_Change
Disconnect_Complete
Link_Key_Request_Complete
Command Parameters
Examples
Comments
Reason
“Accept”
“Accept” (Default)
“Reject”
“Reject - unacceptable
params”
“Reject - unknown options”
TokenRate
0x00
TokenBucketSize
0x00
PeakBandwidth
0x00
Latency
0xFFFFFFFF
DelayVariation
0xFFFFFFFF