B.12 establish tcs connection, Procedure, Establish tcs connection – Teledyne LeCroy Merlins Wand - Users Manual User Manual
Page 166
150
CATC M
ERLIN
’
S
W
AND
2.00
C
HAPTER
B
User’s Manual
Command Generator Examples
B.12 Establish TCS Connection
Procedure
In this scenario, Merlin's Wand establishes a TCS connection.
This procedure assumes that an ACL connection has been established. See
“Establish Baseband Connection” on page 139.
Step 1
Click the TCS tab to display the TCS drop-down menu.
Step 2
Select Register_Intercom_Profile from the menu.
Merlin 's Wand must register its Intercom profile before it can form a
TCS connection.
Step 3
Click Execute.
The Event Log should display “Register_Intercom_Profile_Complete.”
Step 4
Repeat Steps 1-3 for the target device.
Step 5
Select Open_TCS_Channel from the menu and select an
HCI handle.
Merlin 's Wand must create an ACL connection before it can form a TCS
connection.