Teledyne LeCroy Merlins Wand - Users Manual User Manual
Page 27
11
CATC M
ERLIN
’
S
W
AND
2.00
C
HAPTER
2
User’s Manual
Getting Started
• Connections - Displays a
hierarchical list of all
connections between
Merlin’s Wand and other
devices. At the top of the list
is the address of the
connected device; below it are the various channels established
between Merlin’s Wand and the device. Symbols:
C = Connection; H = HCI ACL; S = HCI SCO; L = L2CAP;
R = RFCOMM; O = OBEX.
• At the bottom of the interface is the Logs window, which
contains tabs for the Event Log and the Script Log:
•
All Log - Captures the commands and events of the
System and Scripts logs
•
System Log - Maintains a log of all commands issued by
Merlin’s Wand and the events that ensue, such as a reply
by another device.
•
Script Log - Maintains a record of the commands issued
by Script Manager and the events resulting from these
commands. If line numbers are referenced in the Script
Log, double-clicking on the line number will move the
cursor to that line in the Script Manager window.