Appendix a: command generator command descriptions, A.1 hci command descriptions, Hci link control commands – Teledyne LeCroy Merlins Wand - Users Manual User Manual
Page 103: Accept_connection_request, Add_sco_connection, Hci command descriptions hci link control commands, Accept_connection_request add_sco_connection
87
CATC M
ERLIN
’
S
W
AND
2.00
C
HAPTER
A
User’s Manual
Command Generator Command Descriptions
Appendix A: Command Generator
Command Descriptions
A.1 HCI Command Descriptions
Note
“N/A” means Not Applicable. This indicates that the specified
command does not have a parameter.
HCI Link Control Commands
Accept_Connection_Request
Used to accept a new incoming connection request. Execute this command
before connection request from another device. By default, all connection
requests are accepted.
Add_SCO_Connection
Will cause the link manager to create an SCO connection in addition to the
existing ACL connection.
Command Parameters
Examples
Comments
N/A
Return Events
Accept_Connection_Request_Complete
Command Parameters
Examples
Comments
HCI_Handle
0x0001
Packet Type
0x0080
Possible packet types:
HV1=0x0020
HV2=0x0040
HV3=0x0080
Return Events
Add_SCO_Connection_Complete
Add_SCO_Connection_Error