Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 107)

91
CATC M ERLIN ’ S W AND 2.00 C HAPTER A
User’s Manual Command Generator Command Descriptions
PIN_Code_Request_Negative_Reply
PIN_Code_Request_Negative_Reply is used to reply to a PIN Code
Request event from the Host Controller when the Host cannot specify a PIN
code to use for a connection. This command should be executed before
PIN_Code_Request event is received. By default, the PIN_Code_Request
event is rejected.
PIN_Code_Request_Reply
PIN_Code_Request_Reply is used to reply to a PIN Code Request event
from the Host Controller and specifies the PIN code to use for a connection.
This command should be executed before Pin_Code Request event is
received. By default, the Pin_Code Request event is rejected.
Read_Clock_Offset
Read_Clock_Offset allows the Host to read the clock offset of remote
devices.
Command Parameters Examples Comments
BD_ADDR 0x010203040506
Return Events
Command_Complete
Command Parameters Examples Comments
PIN_Code 1234 PIN_Code is a string
character that can be up to
128 bits in length
BD_ADDR 0x010203040506
Return Events
Command_Complete
Command Parameters Examples Comments
HCI_Handle 0x0001
Return Events
Read_Clock_Offset_Complete
Read_Clock_Offset_Error
PIN_Code_Request_Negative_Reply
PIN_Code_Request_Negative_Reply is used to reply to a PIN Code Request
event from the Host Controller when the Host cannot specify a PIN code to
use for a connection. This command should be executed before
PIN_Code_Request event is received. By default, the PIN_Code_Request
event is rejected.
PIN_Code_Request_Reply
PIN_Code_Request_Reply is used to reply to a PIN Code Request event from
the Host Controller and specifies the PIN code to use for a connection. This
command should be executed before Pin_Code Request event is received. By
default, the Pin_Code Request event is rejected.
Read_Clock_Offset
Read_Clock_Offset allows the Host to read the clock offset of remote
devices.
Command Parameters Examples Comments
BD_ADDR 0x010203040506
Return Events
Command_Complete
Command Parameters Examples Comments
PIN_Code 1234 PIN_Code is a string
character that can be up to
128 bits in length
BD_ADDR 0x010203040506
Return Events
Command_Complete
Command Parameters Examples Comments
HCI_Handle 0x0001
Return Events
Read_Clock_Offset_Complete
Read_Clock_Offset_Error