Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 57)

41
CATC M ERLIN ’ S W AND 2.00 C HAPTER 3
User’s Manual Profile Wizard
the Control Panel window.
The Add/Remove Hardware Wizard will open.
Step 3 Click Next.
Step 4
Select “Add/Troubleshoot a device” and click Next.
The Wizard will look for Plug and Play hardware, then it will display a
list of all the hardware it finds on the computer.
Step 5
Select “Add a new device” from the list and click Next.
Step 6 Select “No, I want to select the hardware from a list” and
click Next.
Step 7
Select “Modems” from the list and click Next.
Step 8 Check “Don’t detect my modem; I will select it from a list.”
and click Next.
Step 9
Select the manufacturer and model of your modem and click
Next.
Step 10
Select the virtual COM port from the list and click Next.
Note To find out the number of the virtual COM port, refer to “Ascertain the COM Port
Number” on page 40.
Step 11
Click the Finish button to complete the installation.
3.7 Installation of Network Driver
BTTNet.sys driver + INF
Step 1
Open ‘Control Panel’
Step 2
Select ‘Add/Remove Hardware’ icon.
Step 3
Select the ‘Add/Troubleshoot a device’ radio button.
Pressing Next would make the system try to search for new
HW devices.
Step 4
In the Device List, select “Add a new device” entry. Press
Next button.
Step 5
Select the “No, I want to select the hardware from a list”
radio button. Press Next.
Step 6
Select “Network Adapters” entry. Press Next.
Step 7
In the ‘Select Network Adapter’ page, press “Have Disk ...”