Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 82)

66
CATC M ERLIN ’ S W AND 2.00 C HAPTER 6
User’s Manual Device Search and Device List Pop-Up Menu
Disconnect All
A fast and easy way to terminate all connections
that Merlin's Wand has established with remote
devices is to use the Disconnect All…
command on the Device List Pop-Up Menu.
Step 1 Open the Pop-Up Menu by
right-clicking on a device.
Step 2
Select Disconnect All…
The Existing Connections
dialog will open, displaying
all pending connections.
Step 3 Click the Disconnect All
button in the Existing
Connections dialog to close
the connections, or click
Cancel to leave them open.
Note : When switching between Profile
Wizard, Command Generator and
Script Manager, all connections that
have been established between
Merlin's Wand and another Bluetooth device should be closed. However, expert
users may choose to leave the connections open. If a connection is left open and
you attempt to switch tools, Merlin's Wand will prompt you to close the
connections. Choosing Disconnect All will close the connections. Choosing
Cancel will leave the connections open, but some commands might not work
properly in the other tool. When switching to Profile Wizard, any open
connections must be closed.