Merlinstart(), Merlinstartrecording(), Merlinstart() merlinstartrecording() – Teledyne LeCroy Merlins Wand - Users Manual User Manual
Page 268
252
CATC M
ERLIN
’
S
W
AND
2.00
C
HAPTER
C
User’s Manual
Merlin’s Wand Scripting Commands
Example
MerlinSetRecordingOptions("C:\\CATC\\Merlin
\\default.rec");
MerlinStart()
MerlinStart(RemoteMachine)
Return value
•
“Success”
•
“Failure”
•
“Already connected”
Comments
This command is used to start Merlin on a specified remote machine or on
a local machine by default.
Example
result = MerlinStart("192.168.2.1");
Trace("Result : ", result, "\n");
MerlinStartRecording()
MerlinStartRecording()
Return value
•
“Success”
•
“Failure”
Comments
This command is used to start a Merlin recording.
Example
MerlinStartRecording();
Parameter
Meaning
Default Value
Comments
Remote
Machine
Specify a
remote
machine to
start Merlin
RemoteMachine can be a name or an IP address
Parameter
Meaning
Default Value
Comments
N/A