B.1 device discovery and remote name request, Procedure, Device discovery and remote name request – Teledyne LeCroy Merlins Wand - Users Manual User Manual
Page 154: Select hci tab, Click execute
Advertising
138
CATC M
ERLIN
’
S
W
AND
2.00
C
HAPTER
B
User’s Manual
Command Generator Examples
B.1 Device Discovery and Remote Name Request
Procedure
In this scenario, Merlin’s Wand performs a General Inquiry and a Remote
Name Request.
Step 1
Select HCI tab.
Step 2
Select Inquiry from the menu. You can use the default settings for
the Inquiry_Length (8 seconds) and Num_Responses (10).
Step 3
Click Execute.
The Event Log should display an Inquiry_Result for each found device
followed by an Inquiry_Complete event.
Step 4
Select Remote_Name_Request from the menu. Select the
target device from the BD ADDR drop-down menu. You can
use the default settings for the other drop-down menus.
Step 5
Click Execute.
The target device should then respond to the command with its name.
Advertising