Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 159)

143
CATC M ERLIN ’ S W AND 2.00 C HAPTER B
User’s Manual Command Generator Examples
Step 7
Select ConnectRequest from the L2CAP menu.
Step 8 Select an HCI Handle from the HCI_Handle drop-down menu.
To determine which HCI_Handle value is correct, open the Piconet
window on the far left side of the Merlin’s Wand application.
Step 9
Select or type a PSM from the PSM menu.
Step 10 Select or type the Receive MTU from the Receive MTU
menu (default value can be used).
Step 11
Click Execute.
The Event Log should indicate that the command was executed and that
a connection has been established.