Write_pin_type – Teledyne LeCroy Merlins Wand - Users Manual User Manual
Page 124
108
CATC M
ERLIN
’
S
W
AND
2.00
C
HAPTER
A
User’s Manual
Command Generator Command Descriptions
Write_Page_Timeout
Write_Page_Timeout command will write the value for the
Page_Reply_Timeout configuration parameter, which allows Merlin’s
Wand to define the amount of time a connection request will wait for the
remote device to respond before the local device returns a connection
failure.
Write_PIN_Type
Write_PIN_Type will specify whether the Host supports variable PIN or
only fixed PINs.
Command Parameters
Examples
Comments
Timeout
0x10
0=Illegal Page Timeout.
Must be larger than 0
N = 0xXXXX Page
Timeout measured in
Number of Baseband slots.
Interval Length = N * 0.625
msec (1 Baseband slot)
Range for N: 0x0001 –
0xFFFF
Time Range: 0.625 msec
-40.9 Seconds
Default: N = 0x2000 Time
= 5.12 Sec
Return Events
Write_Page_Timeout_Complete
Write_Page_Timeout_Error
Command Parameters
Examples
Comments
PIN_Type
0
0x00=Variable PIN
0x01=Fixed PIN
Return Events
Write_PIN_Type_Complete
Write_PIN_Type_Error