Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 88)

72
CATC M ERLIN ’ S W AND 2.00 C HAPTER 7
User’s Manual Data Transfer Manager and Data Pipes
Saving Data Transmit Pipe Lists
Step 1 (Optional) Delete all pipes. If pipes are already displayed on
the Data Transmit page of Data Transfer Manager, any
newly created pipes will be added to the displayed list. To
create an entirely new list of pipes, the currently displayed
list should be deleted.
Note : The default pipe list is automatically loaded into the Data Transmit page when the
Merlin's Wand application is opened. If no list has been saved as default, then no
list will be loaded.
If the application hasn't been shut down since the last time that Data Transfer
Manager was used, then the last list that was open in the Data Transmit page will
be displayed the next time the tool is opened.
Step 2 Create one or more data pipes.
Step 3
Click Save Pipe List... to bring up the Save As dialog. Enter
a file name and save the list as a Merlin's Wand Pipe File
[*.pipe].
Saving a Default List
Step 1 Create one or more data pipes or open a pipe list.
Step 2
Click Save List As Default.
The list will be saved as default.pipe. That list is loaded into the
Data Transmit page when the Merlin's Wand application is opened.
However, if the user exits Data Transfer Manager but doesn't exit the
application, the last list that was open in the Data Transmit page will be
the one displayed when the tool is next accessed.
Saving Data Receive Pipes
Step 1 Select a pipe in the Data Receive page of Data Transfer
manager.
Step 2
Click Save Pipe to File.
The Save As dialog will come up. Enter a file name, including the file
type extension, then click Save.
7.6 Deleting Pipes
Note : Deleting pipes removes them from the list displayed in Data Transfer Manager. If
the pipes were previously saved in a pipe list file, deleting them in Data Transfer
Manager won't delete them from the file. To delete pipes from a pipe list file, first
delete the pipes, then save the pipe list.