Authentication_requested, Change_connection_link_key, Change_connection_packet_type – Teledyne LeCroy Merlins Wand - Users Manual User Manual
Page 104
88
CATC M
ERLIN
’
S
W
AND
2.00
C
HAPTER
A
User’s Manual
Command Generator Command Descriptions
Authentication_Requested
Used to initiate authentication between the two devices associated with the
specified HCI_Handle.
Change_Connection_Link_Key
Used to force both connected devices to generate a new link key.
Change_Connection_Packet_Type
Used to change which packet types can be used for a connection that is
currently established.
Command Parameters
Examples
Comments
HCI_Handle
0x0001
Return Events
Authentication_Error
Authentication_Complete
Command Parameters
Examples
Comments
HCI_Handle
0x0001
Range: 0x0000-0x0EFF
Return Events
Change_Connection_Link_Key_Error
Change_Connection_Link_Key_Complete
Command Parameters
Examples
Comments
HCI_Handle
0x0001
Packet_Type
0x0008
Possible Values:
ACL
0x0008 = DM1
0x0010 = DH1
0x0400 = DM3
0x0800 = DH3
0x4000 = DM5
0x8000 = DH5
SCO
HV1: 0x0020
HV2: 0x0040
HV3: 0x0080
or any combination