Hcireadscanenable(), Hcireadscoflowcontrolenable(), Hcireadscanenable() hcireadscoflowcontrolenable() – Teledyne LeCroy Merlins Wand - Users Manual User Manual
Page 212
196
CATC M
ERLIN
’
S
W
AND
2.00
C
HAPTER
C
User’s Manual
Merlin’s Wand Scripting Commands
HCIReadScanEnable()
HCIReadScanEnable()
Return value
•
“GENERAL_ACCESSIBLE”
•
“LIMITED_ACCESSIBLE”
•
“NOT_ACCESSIBLE”
•
“CONNECTABLE_ONLY”
•
“Failure”
Comments
Retrieves the current accessible mode of Merlin’s Wand.
Example
Trace("Merlin's Wand accessible mode: ",
HCIReadScanEnable());
HCIReadSCOFlowControlEnable()
HCIReadSCOFlowControlEnable()
Return values
Returns a list with two values: status and SCO flow control enable.
Status (element 0) is one of the following:
•
“Success”
•
“Failure”
SCO flow control enable (element 1) is the one-byte SCO flow control
value. (0=SCO flow control disabled; 1=SCO flow control enabled.)
Comments
Reads the SCO flow control enable value. This value determines whether
the Host Controller will send Number Of Completed Packets events for
SCO Connection Handles.
Parameter
Meaning
Default Value
Comments
N/A
Parameter
Meaning
Default Value
Comments
N/A