Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 55)

39
CATC M ERLIN ’ S W AND 2.00 C HAPTER 3
User’s Manual Profile Wizard
Open the application and send the data. It will use the modem driver on
the virtual COM port to send the data to the Serial Port device through
Merlin’s Wand.
3.4 Restarting the Wizard
When working within Profile Wizard, a new session may be started at any
time.
Click the Restart Wizard button on any screen.
• If Merlin’s Wand is currently emulating a connected device, the connection
will be broken, and Profile Wizard will return to the default Profile Wizard
screen.
• If Merlin’s Wand is currently connected to a device, a dialog box will ask if the
connection should be terminated. Clicking the Yes button will cause the con-
nection to be broken, and Profile Wizard will return to the default Profile Wiz-
ard screen. Clicking the No button will cancel the Restart Wizard request.
3.5 Installing the Virtual COM Port Driver
To connect to a device that uses the Dial-Up Gateway, Fax Gateway, LAN,
or Serial Port profile, you will need to install the virtual COM port driver
that is included with the Merlin’s Wand installation.
On Windows 2000
Step 1
Select Start > Settings > Control Panel from the desktop
taskbar, then double-click on Add/Remove Hardware in the
Control Panel window.
The Add/Remove Hardware Wizard will open.
Step 2 Click Next.
Step 3 Select “Add/Troubleshoot a device” and click Next.
The Wizard will look for Plug and Play hardware, then it will display a
list of all the hardware it finds on the computer.
Step 4
Select “Add a new device” from the list and click Next.
Step 5 Select “No, I want to select the hardware from a list” and
click Next.
Step 6
Select “Ports (COM and LPT)” from the list and click Next.
Step 7
Click the Have Disk button.
Step 8 Click the Browse button so that you can browse to the driver