B.6 l2cap channel disconnect, Procedure, L2cap channel disconnect – Teledyne LeCroy Merlins Wand - Users Manual User Manual
Page 160: Select the appropriate cid from the cid menu, Click execute
Advertising
144
CATC M
ERLIN
’
S
W
AND
2.00
C
HAPTER
B
User’s Manual
Command Generator Examples
B.6 L2CAP Channel Disconnect
Procedure
In this scenario, Merlin’s Wand terminates an L2CAP connection.
This procedure assumes that an L2CAP connection has been established.
See “L2CAP Connection” on page 142.
Step 1
From the L2CAP menu, select DisconnectRequest.
Step 2
Select the appropriate CID from the CID menu.
Step 3
Click Execute.
The Event Log should indicate that the command was successfully
completed, with “Disconnection_Complete.”
Advertising