Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 39)

23
CATC M ERLIN ’ S W AND 2.00 C HAPTER 3
User’s Manual Profile Wizard
•
Get or Put a file — To create a new folder in either device’s file
directory, right-click on the directory level in which you wish to place
the new folder, then choose “Create new folder” from the menu that
pops up.
The Enter Folder Name dialog will appear. Type in a name for the
new folder, then click OK. The new folder will appear in the chosen
directory.
•
Delete a file — To create a new folder in either device’s file directory,
right-click on the directory level in which you wish to place the new
folder, then choose “Create new folder” from the menu that pops up.
The Enter Folder Name dialog will appear. Type in a name for the
new folder, then click OK. The new folder will appear in the chosen
directory.
Connect to Device: HCRP Server
This section explains how to use Profile Wizard to configure Merlin’s Wand
to connect to a Hardcopy Cable Replacement Profile server, send
commands to it, and send a file to print.
Step 1
Complete steps 1-6 in Section 3.2, “Connecting to Devices”
on page 17.
Step 2
Select HCRP Server from the list on the Select Profile
screen.
(Optional) Select the Allow Role Switch option on the screen to enable
Merlin’s Wand to switch roles during the connection.
Step 3 Press Next.
Merlin’s Wand will establish an L2CAP connection with the device, and
the Wizard will advance to the HCRP client screen.
Step 4
You can send individual commands to the HCRP server, or
specify a file to transfer to the server for printing.
Send an individual command:
(a) Select a command from the drop-down list.
(b) Click Send Cmd.
Select a file to transfer:
(a) Click Browse.
The Open dialog will come up.
(b) Use the Open dialog to browse the file that you want to transfer, then
click Open.
The file’s name and directory path will be shown in the Select File to
Transfer for Printing box.
(c) Click Start Transfer to send the selected file to the server.