Procedure, Sdp reset database and add profile service record – Teledyne LeCroy Merlins Wand - Users Manual User Manual
Page 162
146
CATC M
ERLIN
’
S
W
AND
2.00
C
HAPTER
B
User’s Manual
Command Generator Examples
B.8 SDP Reset Database and Add Profile Service
Record
Procedure
In this scenario, Merlin’s Wand resets the SDP database and then adds an
SDP Profile Service Record.
This procedure assumes that an ACL connection has been established
between Merlin’s Wand and the target device. “Establish Baseband
Connection” on page 139.
Note
A connection is not necessary to perform a Reset_Database or
AddProfileServiceRecord.
Step 1
From the SDP tab select ResetDatabase.
Step 2
Click Execute.
The Event Log should indicate that the database was reset.
Step 3
Select AddProfileServiceRecord from the menu.
Step 4
Select a profile from the Profile menu.
Step 5
Select a server channel from the Channel menu.
Step 6
Click Execute.
Success will be indicated in the Event Log with
“AddProfileServiceRecord_Complete” and the type of profile added.