3 stdadd auto - standard addition – Metrohm tiamo 2.1 Manual User Manual
Page 1003
■■■■■■■■■■■■■■■■■■■■■■
5 Method
tiamo 2.1
■■■■■■■■
989
Stirrer
Stirrer
Selection of the stirrer.
Selection
1 | 2 | 3 | 4 | off
Default value
1
off
No stirrer will be used.
Stirring rate
Setting the stirring rate. The algebraic sign of the stirring rate changes the
direction in which the stirring is done.
Range
-15 ... 15
Default value
8
Switch off automatically
on | off (Default value: on)
If this option is enabled, the stirrer will be switched off automatically when
the command has finished.
5.6.4.16.3
STDADD auto - Standard addition
Tab: Method
▶ STDADD ▶ Properties... ▶ Standard addition
Command name
Name of the command.
Input
25 characters
The parameters for the standard addition can be defined on this tab
Number of additions
Number of times the standard solution is added.
Range
1 ... 19
Default value
3
Volume auxiliary solution
Volume of the auxiliary solution (e.g. buffer) which was added to the sample
before the first standard addition.
Range
0.0000 ... 9999.999 mL
Default value
0.0000 mL