Metrohm tiamo 2.1 Manual - Manual (Page 882)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
868 ￭￭￭￭￭￭￭￭ tiamo 2.1
5.6.4.2.4 MEAS pH - Evaluations
Tab: Method ▶ MEAS pH ▶ Properties... ▶ Evaluations
Command name
Name of the command.
Input 25 characters
The following methods for evaluation of measurement curves can be acti-
vated and defined on this tab.
Fix endpoint evaluation
Fix endpoint evaluation
on | off (Default value: off)
If this option is activated, then the associated values for the other measured
quantities will be interpolated with a fix measured quantity (Measured
value or Time) for the fix endpoint from the measuring point list.
Moves the selected line up (changes the sequence).
Moves the selected line down (changes the sequence).
[New]
Opens the dialog window Fix endpoint evaluation # to enter a new fixed
endpoint (see Chapter 5.6.4.2.6, page 872).
[Properties]
Opens the dialog window Fix endpoint evaluation # to edit the fixed
endpoint selected in the table (see Chapter 5.6.4.2.6, page 872).
[Delete]
Deletes the selected line.
Minimum evaluation
Minimum evaluation
on | off (Default value: off)
If this option is enabled, then the associated time and temperature for the
minimum measured value will be interpolated from the measuring point list.
Threshold value
The evaluation of the minimum begins as soon as the slope of the curve
exceeds the set threshold value.