Metrohm tiamo 2.1 Manual - Manual (Page 1439)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 8 Manual Control
tiamo 2.1 ￭￭￭￭￭￭￭￭ 1425
Titrino: 751, 758, 785, 784, 785, 794, 795, 798, 799
Titrando: 808, 809, 835, 836, 841, 842, 857, 888, 890, 901, 902, 904,
905, 906, 907
Dosing Interface: 846
Conductometer: 856
Coulometer: 756, 831
pH/Ion - Meter: 867
Sample changer: 730, 774, 778, 789, 814, 815, 864, 874
Robitic Titrosampler: 855
8.4.2.2 Stirring - Switch on/off
Program part: Manual Control
Here stirrers can be switched on and off. This tab appears when selecting a
single stirrer as well as with all stirrers.
Stirring rate
Select the stirring rate. This parameter can also be modified live.
Range -15 ... 15
Default value 8
[Start]
Start stirring for the selected stirrer.
[Stop]
Stop stirring for the selected stirrer.
8.4.2.3 Stirring - Continuous operation
Program part: Manual Control
Here stirrers can be switched on for a defined time. This tab only appears if
a single stirrer is selected.
Stirring rate
Select the stirring rate. This parameter can also be modified live.
Range -15 ... 15
Default value 8
Stirring time
Enter the time during which should be stirred. If this parameter is modified
after the start of the stirrer, it is not valid until the next stirring procedure.
Range 1 ... 999999 s
Default value 60 s