Metrohm tiamo 2.1 Manual - Manual (Page 428)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
414 ￭￭￭￭￭￭￭￭ tiamo 2.1
Command variables
No command variables are generated in the method run by the START
command.
Method variables
The following method variables are defined in the START command and
can be used in formulas under the designation 'MV.Variable name.Var-
iable designation':
Identification Description
.VAL Result value (optional, i.e. 'MV.Factor'
=MV.Factor.VAL') (Text, Number or
Date/Time)
.OVF Exceeding limits for method variable
(Number: 1 = limit exceeded, 0 = limit
not exceeded)
In the following lines you will find the method variables (sample data)
present in the default settings which appear in the Run subwindow and
which can be edited and deleted in the START command of the corre-
sponding method.
Sample size.VAL Value of 'Sample size' (Number)
Sample size.OVF Exceeding limit for 'sample size' (Num-
ber)
Unit.VAL Value of 'Unit'. (Text)
Unit.OVF Exceeding limit for 'unit' (Number)
Sample position.VAL Value of 'Sample position' (Number)
Sample position.OVF Exceeding limit for 'sample posi-
tion' (Number)
ID1 (…3).VAL Value of 'ID1…3' (Text)
ID1 (…3).OVF Exceeding limit for 'ID…3' (Number)
5.6.2.2.2 START - General
Tab: Method ▶ START ▶ Properties... ▶ START 'Command name' ▶ General
Command name
Name of the command.
Input 25 characters