Metrohm tiamo 2.1 Manual - Manual (Page 159)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Workplace
tiamo 2.1 ￭￭￭￭￭￭￭￭ 145
￭ Conditioning condition fulfilled
If the conditioning requirement has been fulfilled, then the status will
switch to COND READY. A new determination can be started in this
status with [Start]. Conditioning can also be canceled with [Stop] or
interrupted with [Hold] and resumed with [Cont]. As long as the deter-
mination has not yet been started, the conditioning requirement will
continue to be monitored on a continuous basis.
3.6.4.9 Working sample table
3.6.4.9.1 Loading new working sample table
Menu item: Workplace ▶ Run ▶ Determination series ▶ [Sample table] ▶ New
A new, empty sample table is loaded as working sample table with the menu
item [Sample table]
▶ New on the tab Determination series, e. g. all
existing sample table lines will be deleted.
3.6.4.9.2 Loading sample table
Dialog window: Workplace ▶ Run ▶ Determination series ▶ [Sample table] ▶ Load
as… ▶ Load sample table
One of the globally available sample tables can be selected in this dialog
window for loading as working sample table.
List of sample tables
The list of sample tables contains information about all the saved sample
tables. The table cannot be edited. With a click on the column title the table
can be sorted according to the selected column in either increasing or
decreasing order.
Name
Name of the sample table.
Saved
Date and time when the sample table was saved.
Saved by
Short name of the user who saved the sample table.
Lines
Number of lines in the sample table.
Comment
Comment on the sample table that was entered on the tab Comment as
comment concerning the sample table (see Chapter 3.3.2.6, page 110).