5 meas spec - evaluation window, 13 meas opt, 1 meas opt - overview – Metrohm tiamo 2.1 Manual User Manual
Page 976: Meas opt
5.6 Commands
■■■■■■■■■■■■■■■■■■■■■■
962
■■■■■■■■
tiamo 2.1
5.6.4.12.5
MEAS Spec - Evaluation window
Dialog window: Method
▶ MEAS Spec ▶ Properties... ▶ Evaluations ▶ [New]/[Prop-
erties]
▶ Evaluation window #
Start wavelength
Lower limit of the evaluation range.
Range
200.0 ... 1100.0 nm
Default value
400.0 nm
End wavelength
Upper limit of the evaluation range.
Range
200.0 ... 1100.0 nm
Default value
1000.0 nm
5.6.4.13
MEAS Opt
5.6.4.13.1
MEAS Opt - Overview
Dialog window: Method
▶ MEAS Opt ▶ Properties.. ▶ MEAS Opt - 'Command name'
Command for absorbance measurements.
Devices
This command can be executed with the following device:
Spectrometer: Avantes
Appearance
The command has the following appearance:
Parameters
The parameters for the command MEAS Opt are configured on the fol-
lowing 3 tabs:
■
General/Hardware
Parameters for device.
■
Measuring parameters
Parameters for setting the measurement procedure.
■
Evaluations
Definition of evaluation results for absorbance measurements.