Metrohm tiamo 2.1 Manual - Manual (Page 317)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Database
tiamo 2.1 ￭￭￭￭￭￭￭￭ 303
[Result on/off]
Switch the selected single result for the statistical calculations off or on. If
the result is switched off, an asterisk (*) appears behind the result value, is
it switched on again, the asterisk disappears. However, updating the statis-
tics data always only takes place with [Recalculate].
Note
If the results of a determination are switched off, the statistics for these
results will be switched off when this determination is recalculated, i.e.
no data for the mean value and standard deviations will be shown. How-
ever, the determinations remain statistically linked to each other so that
the results can also be switched on again.
4.5.2.6.4.5 Modify variable
Dialog window: Reprocessing ▶ Modifications ▶ Variables ▶ [Modify] ▶ Modifiy var-
iable
In the dialog window Modify variable the value of the selected variable is
modified.
Variable
Shows the name of the variable.
Value
Value of the variables. With variables of the type Date the date must be
entered in the dialog window (see Chapter 2.5.1, page 79).
Range -1.0 E+99 ... 1.0 E+99
(for Type = Number)
Input 100 characters
(for Type = Text)
Selection 'Date'
(for Type = Date/Time)
4.5.2.6.4.6 Curve evaluation
4.5.2.6.4.6.1 Modifications - Curve evaluation
Tab: Database ▶ Determinations ▶ Reprocess... ▶ Reprocessing ▶ Modifica-
tions ▶ Curve evaluation
On the tab Curve evaluation the curves that can be manually evaluated
are displayed.