Metrohm tiamo 2.1 Manual - Manual (Page 419)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.1 ￭￭￭￭￭￭￭￭ 405
￭ Parallel running normal track
If the check box Return immediately in the (see Chapter 5.6.2.3, page
422) command is activated, then the corresponding command will be be
highlighted with an arrow (see below). The execution of the commands
in the normal track is started when this track is called, but it sends an
acknowledgement immediately to the track containing the correspond-
ing (see Chapter 5.6.10.3, page 1151) command. This means the execu-
tion of the calling track will also be continued, i.e. the two tracks will be
executed simultaneously.
Sequential running normal track Parallel running normal track
5.5.2.3 Series start track
Subwindow: Method
A series start track is a track that the user can create manually with
Paste
▶ New track... ▶ Series start track or with the icon . It starts
with the start command (see Chapter 5.6.2.4, page 424) and finishes with
an end command (see Chapter 5.6.2.8, page 427). Only one series start
track can be inserted per method.
The series start track is executed only once during the run: at the beginning
of the first determination of a series and even before the (see Chapter
5.5.2.1, page 403). Sample Processors can, for example, be initialized with
it at the beginning of a determination series.