Metrohm tiamo 2.1 Manual - Manual (Page 189)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Workplace
tiamo 2.1 ￭￭￭￭￭￭￭￭ 175
Display grid
on | off (Default value: off)
If this option is enabled, a grid will be displayed
Background
Selection of the color for the curve background.
Selection Color selection | white
Default value white
3.9 Subwindow Report
3.9.1 Report - General
Subwindow: Workplace ▶ Report
Subwindow Report
The reports of determinations are displayed in the subwindow Report. The
subwindow can be switched on in the program part Workplace during the
definition of the Layout and thus made visible (see Chapter 3.1.7.2, page
88). It can be enlarged and reduced as required; it can also be maximized.
Tabs
The subwindow Report is comprised of the following tabs:
￭ Latest report
Display of the most recently automatically generated report.
￭ Selected report
Display of the report selected in the report overview.
￭ Report overview
Overview of the reports saved in the workplace.
3.9.2 Latest report
Tab: Workplace ▶ Report ▶ Latest report
The report most recently generated in the method run is automatically dis-
played on the tab Latest report. The content and format of the report are
determined by the report template selected.
3.9.3 Selected report
Tab: Workplace ▶ Report ▶ Selected report
The report selected in the report overview is shown on the tab Selected
report. The content and format of the report are determined by the report
template selected.