Metrohm tiamo 2.1 Manual - Manual (Page 328)

4.5 Determination overview ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
314 ￭￭￭￭￭￭￭￭ tiamo 2.1
Show endpoints
Show endpoints
on | off (Default value: on)
If this option is enabled then the endpoints found will be shown on the curve
by the symbol ♦ and labeled with EP# (potentiometric endpoint), BP# (break
point), FP# (fixed endpoint), HP (HNP), MI (minimum value) or MA (maxi-
mum value).
Automatic EPs
Selection of the color for automatically set endpoints.
Selection 13 colors | black
Default value black
Manual EPs
Selects the color for manually set endpoints.
Selection 13 colors | pink
Default value pink
Show evaluation lines
Show evaluation lines
on | off (Default value: off)
If this option is enabled then the evaluation lines (tangents, auxiliary lines)
will be shown.
Tangents
Selection of the color for the tangents and auxiliary lines.
Selection 13 colors | light green
Default value light green
Auxiliary lines
Selection of the color for the auxiliary lines.
Selection 13 colors | blue
Default value blue
4.5.2.6.5 Result view
Subwindow: Database ▶ Determinations ▶ Reprocess... ▶ Reprocessing ▶ Result
view
In the subwindow Result view of the dialog window Reprocessing results
and raw data are displayed on the following two tabs: