Metrohm tiamo 2.1 Manual - Manual (Page 241)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Database
tiamo 2.1 ￭￭￭￭￭￭￭￭ 227
Width
Shows the predefined width of the fixed report.
Height
Height of fixed report.
Range 0.0000 ... (max. page height) mm
Fixed report
Selection of a predefined fixed report.
Selection Calculations | Calibration data | Curves | Mes-
sages | List of measuring points | Method
parameters | Result list | Raw data (endpoints)
| Standard addition | Statistics data (brief) | Sta-
tistics data (full) | Titration and measuring
parameters | Signature list Determination | Sig-
nature list Method | Variables | Devices used |
Common variables used | Sample solution used
(TC conductivity) | Sensors used | Monitoring
report
Default value Calculations
Command name
Name of the command for which a measuring point list is to be produced.
With not defined, the lists for all curves present in the determination will
be produced as default.
These parameters appear only when Fixed report = Measuring point
list.
Input 50 characters
Selection not defined
Default value not defined
4.4.1.4.3.8 Report template - Group field
Program window: Database ▶ Report template
A group field is for the purpose of grouping together a variety of fields in
the report template. All of the fields gathered together in a group field can
be moved together as a group. The group field prevents a page break inside
the group field.
The group field always extends across the entire width of a page; only the
upper edge (Y value) and the height of the field can be configured.