Metrohm tiamo 2.1 Manual - Manual (Page 873)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.1 ￭￭￭￭￭￭￭￭ 859
5.6.4 Measuring commands
5.6.4.1 Measuring commands - Overview
Menu item: Method ▶ Insert ▶ New command... ▶ Measure
Commands for measurements with different measured quantities.
The following measuring commands can be selected:
￭ MEAS pH
Potentiometric pH measurement with pH electrodes.
￭ MEAS U
Potentiometric voltage measurement with metal electrodes.
￭ MEAS Ipol
Amperometric measurement with selectable polarization voltage (meas-
ured value current I).
￭ MEAS Upol
Voltametric measurement with selectable polarization current (measured
quantity voltage U).
￭ MEAS T
Temperature measurement.
￭ MEAS T/Flow
Temperature and gas flow measurement.
￭ MEAS Conc
Concentration measurement (direct measurement).
￭ MEAS Cond
Conductivity measurement.
￭ MEAS TC Cond
Measurement of the temperature coefficients of the conductivity.
￭ MEAS Ref
Measurement of a reference spectrum.
￭ MEAS Spec
Measurement of the sample spectrum
￭ MEAS Opt
Adsorption measurement
￭ STDADD man
Standard addition with manual addition of the standard addition solu-
tion.
￭ STDADD dos
Standard addition with addition of the standard addition solution from
a dosing device.
￭ STDADD auto
Standard addition with automatic addition of the standard addition sol-
ution from a dosing device in such a way that a constant potential
difference results.