Metrohm tiamo 2.1 Manual - Manual (Page 417)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.1 ￭￭￭￭￭￭￭￭ 403
Presentation
The individual tracks are arranged side by side in the method window. The
track name is displayed in the START or TRACK command, respectively, as
well as in the END command.
5.5.2 Track types
5.5.2.1 Main track
Subwindow: Method
The main track contains the main sequence of the method and exists in
each method. It starts with a (see Chapter 5.6.2.2, page 413) and finishes
with an (see Chapter 5.6.2.8, page 427). The method variables required are
defined in the START command. The END command indicates the end of
the method run. The main track can neither be deleted nor moved.