Metrohm tiamo 2.1 Manual - Manual (Page 1448)

8.4 Manual Control - Functions ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1434 ￭￭￭￭￭￭￭￭ tiamo 2.1
External position
Select the external position to which the current robotic arm position is to
be assigned.
Range 1 ... 4
Default value 1
[Assign]
Trigger assignment. During the assignment the cursor is displayed as hour-
glass.
8.4.4.5 Sample changer - Pump
Program part: Manual Control
Here the pumps connected to the tower can be switched on and off.
Pump 1
Manually control pump 1 or valve 1 on the selected tower.
Operation
Select whether the pump or valve should be switched on/off manually or
whether they should be switched on for a defined time and then automat-
ically be switched off.
Selection On/Off | Duration
Default value On/Off
Duration
Enter the duration during which the pump/valve should remain switched on.
This field only appears for Operation = Duration.
Range 1 ... 999999 s
Default value 60 s
[Start]
Start pump 1. In the status display the running time since start is shown.
[Stop]
Stop pump 1.
Pump 2
Manually control pump 2 or valve 2 on the selected tower.
Operation
Select whether the pump or valve should be switched on/off manually or
whether they should be switched on for a defined time and then automat-
ically be switched off.