Metrohm tiamo 2.1 Manual - Manual (Page 256)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
242 ￭￭￭￭￭￭￭￭ tiamo 2.1
Scaling
Start value
Initial value for scaling the y-axis.
Range -1.0 E12 ... 1.0 E12
Default value 0.0
End value
End value for scaling the y-axis.
Range -1.0 E12 ... 1.0 E12
Default value 1000.0
4.4.3.2.4 Curve overlay - Options
Dialog window: Database ▶ Tools ▶ Templates ▶ Curve overlay templates ▶ Prop-
erties
Options for the graphical display of the overlaid curves.
Display grid
on | off (Default value: off)
If this check box is actjvated then a grid will be shown against the back-
ground.
Grid type
Selection of the type of grid line.
Selection Select line type
Grid color
Selection of the grid line color.
Selection Color selection | gray
Default value gray
Show endpoints
on | off (Default value: off)
If this check box is activated then the endpoints found will be indicated on
the curve by the symbol ♦ and labeled with EP# (potentiometric endpoints),
BP# (break point) or FP# (fixed endpoint).
Automatic EPs
Selection of the color for automatically set endpoints.
Selection Color selection | black
Default value black