Metrohm tiamo 2.1 Manual - Manual (Page 1306)

6.9 Sample solutions (TC conductivity) subwindow ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1292 ￭￭￭￭￭￭￭￭ tiamo 2.1
Removes the selected column from the table.
Modifies the sequence of displayed columns by moving the selected column
up.
Modifies the sequence of displayed columns by moving the selected column
down.
6.9.2.5 Print solution list
Dialog window: Configuration ▶ Sample solutions (TC conductivity) ▶ [Edit] ▶ Print
(PDF)… ▶ Print list of sample solutions (TC conductivity) (PDF)
[Edit] ▶ Print (PDF)… opens the dialog window Print list of sample
solutions (TC conductivity) (PDF).
Orientation
Selection
Portrait | Landscape
Default value Portrait
Portrait
Prints the table in portrait format.
Landscape
Prints the table in landscape format.
[OK]
The table is shown in the required format as a PDF file and can be opened
directly with Acrobat Reader; it can then be printed and/or saved.
6.9.3 Sample solutions (TC conductivity) properties
6.9.3.1 Edit properties
Dialog window: Configuration ▶ Sample solutions (TC conductivity) ▶ [Edit] ▶ Prop-
erties… ▶ Sample solution (TC conductivity)
The parameters for the selected line are defined on the following tabs:
￭ General
General properties.
￭ TC data
Data for TC determination and monitoring.