Metrohm tiamo 2.1 Manual - Manual (Page 421)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.1 ￭￭￭￭￭￭￭￭ 407
5.5.2.5 Exit track
Subwindow: Method
An exit track is a track that can be created manually with Paste ▶ New
track... ▶ Exit track or with the icon . It starts with the start command
(see Chapter 5.6.2.6, page 425) and finishes with a end command (see
Chapter 5.6.2.8, page 427). Only one exit track can be inserted per method.
The exit track is executed as soon as all normal tracks and the main
track have finished or if the determination has been stopped manually. If a
new exit track is created, then a (see Chapter 5.6.8.4, page 1123) com-
mand and a (see Chapter 5.6.8.3, page 1121) and a REPORT command will
be automatically inserted into this track. With these commands it can be
guaranteed that a database entry and a report are created for each deter-
mination, even if the determination has been stopped either manually or
due to an error.
5.5.2.6 Error track
Subwindow: Method
An error track is a track that can be created manually with Paste ▶ New
track... ▶ Error track or with the icon . It begins with a start command
(see Chapter 5.5.2.6, page 407) and finishes with an end command (see
Chapter 5.6.2.8, page 427). Only one error track can be inserted per
method.