Metrohm tiamo 2.1 Manual - Manual (Page 1431)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 8 Manual Control
tiamo 2.1 ￭￭￭￭￭￭￭￭ 1417
8 Manual Control
8.1 Manual Control - General
Program part: Manual Control
Definition
In tiamo, Manual Control refers to the program part in which the con-
nected devices can be directly actuated, i.e. without a predefined execution
specification. The precondition for this is that the devices are switched on
and detected by tiamo. The Manual control is also possible live when run-
ning a method.
Close
The dialog window Manual Control can be closed with [Close] or the
Windows buttons for closing.
Note
The Manual Control can only be closed when no more manually triggered
actions are running (except: Stirrer is on).
8.2 Manual control - Desktop
Program part: Manual Control
Manual Control symbol
If you click on the Manual symbol in the vertical bar on the left margin, the
program part Manual Control will be opened in its own window, while
the Manual symbol will be shown in color at the same time.
Elements
The desktop of the program part Manual control comprises the following
elements:
￭ Selecting device
￭ Functions/Parameters
￭ Graphic function