Metrohm tiamo 2.1 Manual - Manual (Page 1369)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 7 Devices
tiamo 2.1 ￭￭￭￭￭￭￭￭ 1355
7.10 778/789 Sample Processor
7.10.1 778/789 Sample Processor - Overview
Dialog window: Configuration ▶ Devices ▶ [Edit] ▶ Properties ▶ Properties - 'Device
type' - 'Device name'
The parameters for the devices 778 Sample Processor and 789 Robotic
Sample Processor XL are set on the following tabs:
￭ General
General device information such as device name, device type, serial num-
ber, etc.
￭ Tower #
Properties of Tower 1 and Tower 2 (if present). These tabs are only dis-
played if the Sample Processor is connected to the PC via an RS-232
interface.
￭ Rack
Information on the rack attached. This tab is only displayed if the Sample
Processor is connected to the PC via an RS-232 interface.
￭ MSB #
Properties of the MSB connectors 1...3 and the peripheral devices con-
nected to. These tabs are only displayed if the Sample Processor is
connected to the PC via an RS-232 interface.
￭ RS-232
Selection of the serial interface the device is connected to.
￭ GLP
Information on GLP tests and GLP monitoring.
7.10.2 Properties - General
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ General
General properties of the device are displayed on the General tab.
Device name
Designation of the device (can be freely defined by user).
Input 50 characters
Default value Device type number_#
Device type
Display of the device type.
Program version
Shows the program version of the device.
Only visible with devices that have their own firmware.