Metrohm tiamo 2.1 Manual - Manual (Page 975)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.1 ￭￭￭￭￭￭￭￭ 961
End wavelength
Upper limit of the spectrum.
Range 200.0 ... 1100.0 nm
Default value 1000.0 nm
Integration time
Integration time for spectrum recording.
Range 0.01 ... 600000 ms
Default value 6 ms
Averaged spectra
The number of spectra that are recorded and averaged.
Range 1 ... 10000
Default value 10
Smoothing
Number of neighboring pixels with which the value for each measurement
pixel is determined.
Range 0 ... 100 Pixels
Default value 0 Pixels
5.6.4.12.4 MEAS Spec - Evaluations
Tab: Method ▶ MEAS Spec ▶ Properties... ▶ Evaluations
Command name
Name of the command.
Input 25 characters
The following additional methods for evaluation of measurement curves can
be activated and defined on this tab.
[New]
Opens the dialog window Evaluation window # for entering the start and
end wavelengths (see Chapter 5.6.4.12.5, page 962).
[Properties]
Opens the dialog window Evaluation window # for editing the start and
end wavelengths selected in the table (see Chapter 5.6.4.12.5, page
962).
[Delete]
Deletes the selected line.