Metrohm tiamo 2.1 Manual - Manual (Page 1233)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.1 ￭￭￭￭￭￭￭￭ 1219
￭ Remove filter
6.4.2.3.2 Audit Trail - Last filter
Menu item: Audit Trail ▶ Filter ▶ Last filter
With the menu item Filter ▶ Last filter or the symbol in the Audit
Trail program window, the previously used filter is reactivated.
6.4.2.3.3 Audit Trail - Quick filter
Menu item: Audit Trail ▶ Filter ▶ Quick filter
A quick filter can be applied for the contents of the selected table field with
the menu item Filter
▶ Quick filter or the symbol in the Audit Trail
program window. After this function has been selected, the field in which
the cursor is located will have a colored background when navigating in the
Audit Trail table. At the same time the following special filter symbol appears:
By double clicking on it with the left-hand mouse button, the contents of
the field selected in the table will be set as the filter criterion and this filter
will be applied directly to the table.
Note
The quick filter can be used again within the filtered table, so that the
number of entries can be limited step by step.
6.4.2.3.4 Audit Trail - Special filter
6.4.2.3.4.1 Special filter table
Dialog window: Audit Trail ▶ Filter ▶ Special filter... ▶ Special filter - Database 'Con-
figDB'
With the menu item Filter ▶ Special filter or the symbol in the Audit
Trail program window, the dialog window Special filter - Database
'ConfigDB' opens for defining user-specific filters.
Filter
Selects the filter to be loaded for processing. An empty table with the name
New filter is loaded as standard.
Selection Filter name | New filter
Default value New filter