Metrohm tiamo 2.1 Manual - Manual (Page 1119)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.1 ￭￭￭￭￭￭￭￭ 1105
5.6.7.8 HEATER
5.6.7.8.1 HEATER - Overview
Dialog window: Method ▶ HEATER ▶ Properties... ▶ HEATER - 'Command name'
Command for controlling the oven temperature.
Devices
This command can be executed with the following devices:
Sample Processor: 774 and 874
Appearance
The command has the following appearance:
Parameters
The parameters for the command HEATER are configured in the following
dialog window:
￭ HEATER - Properties
Command variables
The following command variables are generated in the method run by the
command HEATER and can be used in formulas under the designation
'Command name.Variable designation':
Identifi-
cation Description
.BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command has
not ever been started
.FIN Command status; 1 = Command has been ended at
least once, 0, invalid (variable not available) = Com-
mand has never been ended
5.6.7.8.2 HEATER - Properties
Dialog window: Method ▶ HEATER ▶ Properties... ▶ HEATER - 'Command name'
Command name
Name of the command.
Input 25 characters