Metrohm tiamo 2.1 Manual - Manual (Page 1136)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1122 ￭￭￭￭￭￭￭￭ tiamo 2.1
Appearance
The command has the following appearance:
Parameters
The parameters for the command DATABASE are configured in the fol-
lowing dialog window:
￭ DATABASE - Properties
All the defined databases in the list of databases are displayed in the
properties window of the command DATABASE.
Command variables
The following command variables are generated in the method run by the
command DATABASE and can be used in formulas under the designation
'Command name.Variable designation':
Identifi-
cation Description
.BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command has
not ever been started
.FIN Command status; 1 = Command has been ended at
least once, 0, invalid (variable not available) = Com-
mand has never been ended
5.6.8.3.2 DATABASE - Properties
Dialog window: Method ▶ DATABASE ▶ Properties... ▶ DATABASE - 'Command
name'
Command name
Name of the command.
Input 25 characters
List of databases
A DATABASE command can define more than one database in which the
determination data are stored which are available for the execution of the
DATABASE command. If several databases are defined, the determination is
stored with the same determination ID in each database.