Metrohm tiamo 2.1 Manual - Manual (Page 1310)

6.10 Rack data subwindow ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1296 ￭￭￭￭￭￭￭￭ tiamo 2.1
6.10 Rack data subwindow
6.10.1 Configuration - Rack data
Subwindow: Configuration ▶ Rack data
Rack data subwindow
The subwindow Rack data contains the Rack table with all the sample racks
for Metrohm sample changers defined for the client. It can be shown in a
separate window in the program part Configuration as a part of the Con-
figuration view or (if not present on the desktop) with View
▶ Quick
access. The subwindow can be enlarged and reduced as required; it can
also be maximized.
Display of sample racks
The rack table is empty in the default settings. Sample racks which are placed
on sample processors, are recognized automatically and included in the rack
table. Additional racks can be imported manually.
6.10.2 Rack table
6.10.2.1 Rack table
Subwindow: Configuration ▶ Rack data
Contents
The rack data table shows the following information about the racks con-
figured as standard:
Rack name
Name of the rack.
Rack code
Rack code of the rack.
Number of positions
Number of sample positions on the rack.
Beaker radius samples
Radius of the beakers on the rack.
Beaker sensor
Defines the beaker sensors for the rack.
Device
Shows the devices to which the rack is attached.