ADS Environmental Services IETG FlowHawk QR 775012 A4 - Manual (Page 124)

4-6 IETG FlowHawk Manual
network quality of service. Perform this validation before
deploying to the field and again at the monitoring site
before installing the monitor.
Gathering Parts and Supplies
Gather the following items to perform the installation:
 GSM module
 One of two wireless antennas available through IETG (p/n
3800-0162 or 3800-0163)
 (applicable only to off-road installations) Extension cables
(4.6-m (15-foot): p/n 507165; 15.2-m (50-foot): p/n 507168)
 Public Static IP address SIM card
 Magnet (p/n 8000-0140)
 8-millimeter anchor bolts with washers and nuts
 Medium-sized non-rotating demolition hammer with a 13-mm
(0.5-in), 19-mm (0.75-in), or 25-mm (1-inch) masonry chisel
(sharpen the chisel before use) and bushing tool, or an abrasive
saw or grinder
 Masonry drill bits for drilling through manhole wall, corbel,
other materials. Include the following:
 13-mm (0.5-in) diameter (minimum) x 305-mm (12-in)
long (minimum) bit
 13-mm (0.5-in) diameter x 914-mm (36-in) long
(minimum) bit
 32-mm (1.25-in) diameter x 305-mm (12-in) bit
 Standard drill bits and masonry bits up to 15 millimeters (0.6
in) in diameter
 Medium- to heavy-duty hammer drill (if no hammer/drill mode
is available on the demolition hammer)