ADS Environmental Services IETG FlowHawk QR 775012 A4 - Manual (Page 312)

8-28 IETG FlowHawk Manual
Disconnecting the ribbon and black cables from the back of the modem
7. Connect the ribbon and black power cables to the
corresponding ports in the back of the new modem.
8. Carefully slide the modem back into the metal bracket in the
EMU, avoiding pinching the cables between the modem and
the back panel of the EMU.
9. Insert a new SIM card or the SIM card from the original
modem into the slot on the new modem. Refer to the next
section, Replacing the SIM Card in the EMU Modem, for
instructions on removing an existing SIM card from a modem
and inserting a SIM card into the modem.
10. Restore external power to the EMU.
11. Enter or confirm the correct IP address is in Profile or Qstart
for the SIM card, and have a data analyst attempt to connect to
the monitor remotely to verify communication.
12. Replace and secure the cover to the EMU, and close the
enclosure in which it is installed.