ADS Environmental Services IETG FlowHawk QR 775012 A4 User Manual

Page 78

Advertising
background image

Sensor Installation and Connection 3-19

Tightening the spreader mechanism screw and hex nut

19. Insert the second spreader mechanism screw through the

following hole based on the ring type:

Overlapping Appropriate ring size adjustment hole on

the outside of the ring

Non-overlapping Last hole on the other free end of the

ring (inserting the screw from the outside of the ring)

20. Slip the large washer onto the screw on the inside of the ring.

Advertising