ADS Environmental Services IETG FlowHawk QR 775012 A4 - Manual (Page 261)

6-82 IETG FlowHawk Manual
Advanced Parameters dialog
5. Select the Store button to save any changes made in the sensor
parameters to the LIF in the database.
Note: When running diagnostics on multiple devices for
the same monitor, finish all device diagnostics before
reactivating the monitor with the updated LIF. Store the
changes for each device to the LIF once complete and
before exiting the device window. Reactivate the monitor
with the new LIF after completing diagnostics on all the
selected devices.
6. Select the Close button to exit the Ultrasonic Diagnostics
dialog and return to the Monitor Diagnostics dialog.
Temperature Diagnostics
This section provides instructions for running diagnostics on the
temperature sensors found in the Peak Combo Sensor (PC), Surface
Combo Sensor (SC), Slimline Peak Combo Sensor (PCS),
Ultrasonic Depth Sensor (SD), and Ultrasonic Depth Sensor with
the pressure option (SC) once connected to the monitor through the
Monitor Diagnostics dialog. Run diagnostics on the temperature
sensor in the following way: