ADS Environmental Services IETG FlowHawk QR 775012 A4 - Manual (Page 258)

Configuration and Activation 6-79
5. Select the Store button to save any changes made in the sensor
parameters to the LIF in the database.
Note: When running diagnostics on multiple devices for
the same monitor, consider waiting to reactivate the
monitor with the new LIF until after completing the device
diagnostics on all the selected devices. However, save the
changes to the database before exiting each device
window.
6. Select the Close button to exit the Velocity Diagnostics dialog
and return to the Monitor Diagnostics dialog.
Smart Depth Diagnostics
This section provides instructions for running diagnostics on the
downward-looking ultrasonic depth sensor found in the Surface
Combo Sensor (SC), Ultrasonic Depth Sensor (SD), and Ultrasonic
Depth Sensor with the pressure option (SC) once connected to the
monitor through the Monitor Diagnostics dialog. Run diagnostics
on the smart depth sensor in the following way:
1. Select the Smart Depth 3 sensor from the Diagnose Device
drop-down list, and then select the Diagnose button.
The Ultrasonic Diagnostics dialog displays the current
configuration parameters stored in the LIF for the Smart
Depth 3 sensor.