ADS Environmental Services IETG FlowHawk QR 775012 A4 - Manual (Page 288)

8-4 IETG FlowHawk Manual
Confirming the Monitor
Confirm the accuracy of the sensor subsystems in the monitor on a
regular basis through Profile or Qstart. Confirmation involves
comparing manually-measured depth of flow and velocity readings
to the monitor's readings. This process also verifies sensor
parameters. Refer to the Profile User's Guide #950015 (version B4
or higher) or the Profile or Qstart online help for detailed
information on performing confirmation procedures.
Obtaining Diagnostic Codes from the Monitor
The FlowHawk enables you to observe monitor activity, view
diagnostic information, and confirm test cryouts from the monitor
through a small LED window on the GSM module for those
monitors using this wireless communication option. The
numbers/characters displayed represent specific codes indicating
current processes, identification, status, or readings associated with
the system and communications. The following sections contain
general descriptions and interpretations of the information available
through the LED and instructions for accessing information or
prompting a message.
LED window in GSM Module
Note: IETG does not offer an EMU that includes an LED
window for display. Therefore, externally-powered
FlowHawks that perform wireless communication through